Tags
11 Steps to Spray Paint Your Car Like the Professionals – Car Bodywork Paint Repair
You’ll be surprised to see only the best way to spray on car paint actually can not be difficult. That doesn’t mean that you go at it and can only grab a tin of paint. There are some principles you must know. Both in the preparation and application.
Step A:
Prepare by gathering all your things that you’re going to need.
Measure B:
You will have to analyze the car carefully for any rough spots. This will smooth out the rough spots. It also lets the spray auto paint to stick better. Make sure all the dust dirt and debris are taken off the vehicle once you have finished sanding. It is imperative that the car be absolutely clean.
Step C:
This will make sure that you get an overall even coating of your colored paint plus helps the paint to adhere nicely. Be sure you apply light coats and allow for drying in between, when you spray the primer. The best way to spray on car paint requires a little getting used to.
Step D:
Now you are pretty well to the point where you are about ready to spray on the shade. In either case, make a few practice strokes on an item before you start with the auto. Once you happen to be ready, begin the passes with the paint without hesitation. You will get uneven coverage, if you hold the spray can or gun in one place and maybe the paint will run. If this happens you’ve got a significant repair job on your had. You’ll most probably have directions regarding how you can spray car paint using the gear or spray cans.
Step E:
It is up to you whether you want to wet sand between coats of primer and colour paints. You might want to study this option on the internet, or check Alloy Wheel Repair Billericay with someone that’s comfortable with just how to spray car paint
Step F:
Once you might be absolutely satisfied with the colour, you are down to the finishing touches. You may now want to apply several coats that are clear. This will give the finished and polish appearance to the auto as well as protect the finish. Likely two coatings will be satisfactory but it’s going to be up to you personally. Make absolutely certain it’s dry in between coats.
Step G:
If you prefer yet again, you have the option of wet sanding. Again, I would recommend you ask the advice of people which can be comfortable with the way to spray paint an automobile. You need to wet sand with these grits in this order if you determine to follow this step then. This will remove spots that may be overly heavy in the clear coat application.
Step H:
Step I:
You should buff the surface. To try this simply use a moderate cut polish.
Step J:
As a final touch, you may want to apply a couple of layers of wax.